Class A Written Test – Part 1
1 / 20
How can you ensure that the vehicle has passed an annual inspection?
2 / 20
A police or appointed ministry officer has the authority to perform a safety inspection:
3 / 20
A properly completed daily inspection report contains:
4 / 20
You must ensure that the following items are secure on the vehicle:
5 / 20
A front tire fails an inspection if the tread on two adjacent grooves anywhere on the tire are:
6 / 20
What is the minimum number of consecutive off-duty hours you must take after accumulating 13 hours driving time?
7 / 20
Three of the following four are good practices before backing. Which is not?
8 / 20
Which of the following steps do you perform after you raise and secure the landing gear?
9 / 20
After the jaws lock when coupling, you should:
10 / 20
This sign means:
11 / 20
After stopping on an uphill grade, when rejoining traffic you should:
12 / 20
The main reason you should check under the hood is:
13 / 20
14 / 20
When backing up the tractor to couple with the trailer, you must:
15 / 20
The maximum length of a combination vehicle is:
16 / 20
Many commercial motor vehicles have a speed limiting system which limits their maximum speed to:
17 / 20
Dangerous goods transported on Ontario’s roads and highways are identified:
18 / 20
If during the course of a trip you discovers a minor defect, you must:
19 / 20
Three of the following activities are considered on-duty, which one is off-duty?
20 / 20
When making a right turn to prevent the wheels from going over the curb or sidewalk, you should;
Your score is
Class A Written Test – Part 3
If driving over the centre line while making a right hand turn, you must:
If during the course of a trip you discover a minor defect, you must:
Which of the following is true when driving a in a roundabout:
When flares or reflectors are required to mark a disabled commercial motor vehicle On a highway, you must place them:
What documentation is not required by the Highway Traffic Act to be carried in a commercial motor vehicle?
After you detect and record a major defect on your daily inspection report, you must:
Who is permitted to change a tire on a commercial motor vehicle?
When a daily log is required, you must track:
Before descending a steep hill, a good safe driving practice is to:
Any load which projects from the rear of the vehicle by 1.5m (5 feet) or more must be marked with:
When starting to move a loaded tractor trailer, the vehicle should be put in:
When uncoupling, the landing gear should:
When are you required to carry the daily inspection report and applicable schedule?
What factor does not affect the maximum allowable gross weight of a commercial vehicle?
Allowing the clutch to slip will result in:
When climbing a steep hill and your speed is reduced you should:
Which of the following would be considered a minor defect when conducting a daily inspection?
Class A Written Test – Part 5
1 / 14
You are required to ensure that the brakes on the vehicle are not out-of-adjustment:
2 / 14
After coupling, if any space appears between the upper plate of the trailer and fifth wheel, this indicates that:
3 / 14
4 / 14
5 / 14
6 / 14
The person who cannot be charged with an offence for an overloaded vehicle is:
7 / 14
When reversing to couple a trailer, the fifth wheel opening must be in direct line with:
8 / 14
What distance must you maintain between commercial motor vehicles travelling in the same direction on a highway?
9 / 14
When driving larger vehicles you must always be aware of the vehicle’s height and width to ensure:
10 / 14
A longer wheel base between the front wheels and the rear wheels of the vehicle creates:
11 / 14
Before moving the tractor to couple with the trailer you must:
12 / 14
Prior to coupling you should check to ensure:
13 / 14
A rear tire fails and inspection if the tread on two adjacent grooves anywhere on the tire are:
14 / 14
In order to transport dangerous goods, you must:
Class A Written Test – Part 2
After a daily inspection, you discover the vehicle does not have any working brake lamps. What must you do?
You can be required to attend a truck inspection station at the request of a:
Before reversing you should:
When your wheels have been in for service, it is important that you:
You cannot drive a commercial motor vehicle after accumulating how many on-duty hours in a seven day cycle?
When approaching a roundabout you must:
Anti-lock braking systems (ABS):
The maximum width of a commercial motor vehicle, including the load, shall not exceed:
When approaching an intersection and you notice the roadway beyond is blocked with traffic, you should:
Which of the following items are checked at a truck inspection station
The driver of which of the following vehicles must adhere to hours of service regulations:
To ensure brakes are functioning normally, you should test the brakes:
The easiest and safest backing manoeuvre is:
As a driver you should minimize possible development of a dangerous situation by:
When uncoupling a trailer, after having lowered the landing gear you should:
A licensed driver learning to operate a commercial motor vehicle must:
When the driver of another vehicle is about to overtake and pass your vehicle, you must:
When rounding a right curve on a highway with a tractor-trailer, you should:
Class A Written Test – Part 4
What is the maximum number of hours you can drive in a day?
To safely complete a turn you should:
When you perform a daily inspection and find no defects, what must you do?
The purpose of a central apron in a roundabout is to:
When can you drive the vehicle after identifying a major defect?
You may notice excessive lash or free play which may indicate a defect in:
What is the maximum number of hours that a daily inspection report is valid for:
You must inspect the load securement and make necessary adjustments after:
Who is responsible for ensuring that loads are secured while in operation:
A good safe driving practice on a multi-lane highway is to:
To assist you in performing the daily inspection, it is necessary to:
Gross weight of a commercial motor vehicle means:
Excessive free play or lash e.g., over 10cm (4 inches), may indicate to you that:
When approaching a railway crossing and the signals lights are activated, you must stop:
The responsibility for the safe operating condition of a commercial motor vehicle is that of:
The key principle in loading any cargo on a commercial vehicle is to ensure:
The maximum height of a commercial motor vehicle, including the load is:
If you are required to hook up a trailer at a remote location, you must:
